RCE-600:
●Utilizes AHTCS (Active Helicopter Tail Control System) to compensate any drift caused by wind direction and force, as well as unintended yaw induced by helicopter itself during flight maneuvers.
●Tailor made specifically for use with high speed digital rudder servos. This gyro festures high sensitivity and minimal reaction time, fully utilizing the potential of modern high speed digital rudder servos.
●Gyro locking mode and gain can be adjusted remotely from the transmitter.
●Digital/Analog servo switchable.
●Reverse switch.
●Delay adjustment.
●Rudder servo travel limit adjustment (ATV).
●Ruddersevevo neutral setup mode.

DS520:
●Coreless Motor Design for fast speed, high efficiency, and low power consumption.
●10 Bits signal resolution for smooth movements.
●Response time of 0.07s/60°. High strength composite alloy gears with high precision and durable structure characteristics.
●Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.
●Supports digital & analog control signal.
●Powerful and precise servo suitable for T-Rex 500 CCPM cyclic and rudder servo use.

RCE-600 Ratings:
●Operating Voltage:DC 4.5~6V丬
●Current Consumption:<20mA @ 4.8V
●Angular Detection Speed:600 degrees/sec
●Operating Humidity:0℃~65℃
●RoHS certification.
●Operating Humidity:0%~95%
●Size:27.6x26x14.5mm
●Weight:9g

DS520 Ratings:
●Stall torque:1.9kg.cm(4.8V)
2.5kg.cm(6.0V)
●Motion speed:0.09sec/60°(4.8V)
0.07sec/60°(6.0V)
●Rating voltage:DC 4.8-6V
●Temperature range:-20°C~+60°C
●Dimension:35 x 15 x 29.2mm
●Weight:25.9g

Includes:
●Double-sided tape x2 sheets
●Servo rudder piece x 3
●Set screw x 1
●Rubber damper x 4
●Brass grommet x 4
●Tapping screw for servo x 4

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.